Softing PBpro ETH - Search and Configure

Chapter 3 - PBpro ETH Administration
PBpro ETH - User Guide
17
PBpro ETH"s IP address
192.168.212.212
(default)
any
Login required
yes
yes
Login user name
config (fixed)
config (fixed)
Login user password
config (default)
config (default)
Supported functions:
discovery of
misconfigured devices
network configuration
device configuration
firmware update
modification of password
no
yes
yes
yes
yes
yes
yes
no
no
yes
Table 2: Configuration functions and interfaces
For proper operation PBpro ETH requires access to the following IP ports:
Port 80
for HTTP (PBpro ETH's web pages)
Port 2355
for discovery and configuration using the tool "Search and
Configure"
Port 2356
for controlling PBpro ETH using TCP/IP sockets
Port 2357
for controlling PBpro ETH using the Windows driver
3.3.2 Search and Configure
Use Search and Configure if PBpro ETH's IP address is unknown or does not match the
actual network environment. Search and Configure is part of the PBpro ETH installation
CD and can be installed directly from CD.
When clicking Search and Configure the network will be scanned for Softing devices.
Devices retrieved will be listed with their MAC address, device type, serial number, name,
IP address, subnet mask and gateway: