Chapter 1 - Introduction
PBpro ETH - User Guide
7
1.4 Scope of delivery
The PBpro ETH comprises the the following parts:
PBpro ETH Remote PROFIBUS Interface
24V power connector
Installation CD
Hardware User Manual (this document)
Note
Before starting the installation make sure the delivery is complete and free of
defects. In case of problems please contact your vendor.
1.5 Intended Use
The PBpro ETH has been designed for use in factory, process and building control. The
unit must not be used in explosion hazard areas. The permissible ambient conditions
given in the Technical Data must be complied with.
The faultless and safe operation of the product requires proper transport, proper storage
and installation, and expert operation and maintenance in accordance with the manual.
To Next Page
Loading...