EV Charger Web interface
Configuration manual V1.00
21
© SolarEdge Technologies
Proxy
All the necessary configurations for using a proxy server can be found in this
part.
OCPP
All the necessary configurations for connecting to an OCPP backend can be
found in this part. The displayed configuration options vary depending on the
selected transmission type (SOAP or JSON).
External TCP Meter
Here, a setting is configured for whether the measured values are read out
from external meters in order to dynamically adapt the charging current. All
necessary configurations for the external meter can be specified in this area.
Display Text
Here, you can make settings for the text that is shown on the display de-
scribing various processes of the charging station. The language of the text
can be changed, the display duration can be configured and the display text
itself can be changed.
The text display is limited to 20 characters, and no umlauts or special char-
acters can be used.
The abbreviations "Wh" and "kWh" must not be used in the display texts as
they may be misleading to the user. These abbreviations are reserved for in-
dicating transmitted energy. If either "Wh" or "kWh" are entered as display
text anyway, this text is ignored and not shown on the display.
4.2 User menu
The user menu contains important information and settings for the user. It is
divided into the following areas:
● Help
● Licenses
● User settings
● Logout
User settings
In this area, changes to the following user settings can be made:
Username and password
The web interface username and the corresponding password can be
changed here. The following rules apply for assigning the password:
● At least 10 characters long
To Next Page
Loading...
