How to fix EVSE Comm Error on SolarEdge Smart EV Charger?
To fix the 'EVSE Comm. Error' on your SolarEdge Battery Charger, check that the internal connections on the communication board are properly done.
What to do if SolarEdge Smart EV Charger shows Internal Error Disconnect from EV?
If your SolarEdge Battery Charger displays an 'Internal Error Disconnect from EV' message: * Disconnect the charger cable from the vehicle. * Turn the inverter AC circuit breaker OFF and then ON again. * Reconnect the charger cable to the vehicle. If the EV Charger is powered by the inverter, repeat the OFF/ON cycle for the inverter AC circuit breaker. If the EV Charger is standalone, repeat the OFF/ON cycle for the EV Charger AC circuit.
What to do if SolarEdge Battery Charger shows Ground Fault (RCD) Press Charge Now?
If your SolarEdge Battery Charger displays a 'Ground Fault (RCD) Press Charge Now' error, press the 'Charge Now' push button on the Smart EV Charger or tap 'Charge Now' on the Smart EV Charger tab of the Monitoring App.
What to do if SolarEdge Smart EV Charger Battery Charger shows Over Current Press Charge Now?
If your SolarEdge Battery Charger displays an 'Over Current Press Charge Now' error, press the 'Charge Now' push button on the Smart EV Charger, or tap 'Charge Now' on the Smart EV Charger tab of the Monitoring App.
What to do if SolarEdge Battery Charger shows Over Voltage Press Charge Now?
If the SolarEdge Battery Charger displays an 'Over Voltage Press Charge Now' error, press the 'Charge Now' push button on the Smart EV Charger or tap 'Charge Now' on the Smart EV Charger tab of the Monitoring App.
What to do if SolarEdge Smart EV Charger Battery Charger shows Under Voltage Press Charge Now?
If your SolarEdge Battery Charger displays an 'Under Voltage Press Charge Now' error, press the 'Charge Now' push button on the Smart EV Charger or tap 'Charge Now' on the EV Smart Charger tab of the Monitoring App.
What to do if SolarEdge Smart EV Charger shows Charging retries ended Disconnect from EV?
If your SolarEdge Battery Charger displays a 'Charging retries ended Disconnect from EV' message, disconnect the Smart EV Charger cable from the vehicle.
What to do if SolarEdge Battery Charger shows Ground Disconnected Disconnect from EV?
If your SolarEdge Battery Charger displays a 'Ground Disconnected Disconnect from EV' message, disconnect the Smart EV Charger cable from the vehicle.
Legal disclaimer about document content accuracy, reliability, and updates.
Explanation of safety symbols used throughout the document.
Essential safety guidelines for product usage and handling.
Proper grounding and wiring procedures for safe electrical operation.
Information on circuit protection devices and operational warnings.
Warning against indoor charging if ventilation is required.
Details on automatic CCID reset and product damage warnings.
Prohibition of using unauthorized extension cords with the charger.
Description of the Smart EV Charger's functions and charging capabilities.
Details on connecting the EV Charger to the power grid.
Lists items included in the package and necessary installation tools.
Identification and function of various connectors and ports.
Explains the functions of the push button based on press duration.
Interpretation of LED ring indicator colors and their meanings.
List of buzzer sounds and their corresponding events.
Step-by-step guide for installing the mounting bracket.
Instructions for physically attaching the charger to the installed bracket.
Procedure for connecting the EV charger cable to the unit.
Guide to using the mySolarEdge mobile application for configuration.
Steps required to create a new user account for mySolarEdge.
Procedures for logging in and setting up the EV Charger via the app.
Detailed steps for charging an electric vehicle with the charger.
Lists required tools and essential guidelines for grid connections.
How to set circuit breaker ratings using DIP switches.
Procedures for installing, connecting, and disconnecting the AC.
Visual representation of supported AC grid types.
Requirements and included items for inverter connection.
Step-by-step guide for connecting to the inverter.
Steps for reattaching the charger covers after installation.
Overview of available communication methods and protocols.
Comprehensive guide for establishing an Ethernet LAN connection.
Instructions for creating and configuring RS485 bus connections.
Information on cellular communication and connector types.
Steps to select and configure communication protocols.
How to confirm successful communication with the monitoring platform.
Guide to obtaining and using the SetApp mobile application.
Steps for initial charger setup using the SetApp.
Setting up communication options using the SetApp interface.
Explains different status messages displayed for communication.
Lists common error codes and their meanings.
Solutions for common errors like internal, interface, and ground faults.
Setting up the Energy Meter's ID and termination via DIP switches.
Steps for physically connecting the Energy Meter to the charger.
Diagrams showing the physical dimensions of the EV charger.
Detailed electrical and communication parameters of the charger.
Features when integrated with inverter and other functionalities.
Safety, emissions compliance, and installation details.
How to contact support and necessary information to provide.
General| Brand | SolarEdge |
|---|---|
| Model | Smart EV Charger |
| Category | Battery Charger |
| Language | English |
To Next Page
