4. Close all covers and turn on the inverter and the Smart EV Charger.
Closing the Smart EV Charger Covers
To close the Smart EVCharger covers:
1.
Place the bottom cover on the Smart EV Charger and tighten the screws (see the
following figure).
2. Place the top cover on the bottom cover, insert and tighten screws (see the
following figure).
Chapter 5: Professional Installer- Connecting the AC Directly to the Smart
EVCharger 34
Smart EV Charger Installation MAN-01-00657-1.0
To Next Page
Loading...
