Need help?Do you have a question about the Solaris FLARE and is the answer not in the manual?
Power| operating voltage | 100-240V AC 50/60Hz |
|---|---|
| fuse | 12A 250V slow-blow (5x20mm) |
| power consumption | 1000W |
Light Source| LED count | 96 units |
|---|---|
| LED type | Cree RGBW (10W each) |
| beam spread | 36° |
Operating Environment| max ambient temperature | +104°F (+40°C) |
|---|---|
| min ambient temperature | -77°F (-25°C) |
| cooling | air cooled – fan |
Weight and Dimensions| length | 19.6" (497mm) |
|---|---|
| width | 8.3" (210mm) |
| height with yoke | 9.1" (232mm) |
| weight | 14.3 lb (6.5 kg) |
Details on the Solaris Flare and Flare Jr. features, brightness, and capabilities.
Steps for unpacking the fixture and checking for included items and potential damage.
Information on voltage requirements, power connection, and setting the correct frequency.
Important safety precautions for operation, installation, and maintenance of the fixture.
Specifications and capabilities of the Solaris Flare and Flare Jr. LED fixtures.
Guidance on how to safely replace the fuse in the Solaris fixture.
Instructions for connecting multiple fixtures via DMX and using appropriate data cables.
Details on DMX connector configurations and 3-pin to 5-pin conversion.
Step-by-step guide for setting up the DMX serial data link for lighting control.
Guidelines for securely mounting and rigging the Solaris fixtures for optimal placement.
How to use the control panel buttons and LCD display to navigate menus and settings.
Description of the main menu functions available for both Flare and Flare Jr. models.
Visual representation of the menu structure and options for the Solaris Flare.
Visual representation of the menu structure and options for the Solaris Flare Jr.
Step-by-step guide on setting the DMX starting address for the fixture.
How to select between wired DMX input or wireless DMX for controlling the fixture.
Instructions for pairing and managing wireless DMX connections for the Flare Jr.
Choosing between Basic and Advanced control modes for fixture operation.
Details on operating the fixture in Basic mode, including RGB and RGBW settings.
Explanation of strobe parameters like intensity, duration, rate, and special effects.
Information on using the Async Strobo feature and the Strobe-Only mode.
Setting up advanced control for LED segments (pixels) and color modes.
Diagrams illustrating pixel segmentation for the Solaris Flare in various modes.
Pixel segmentation for Flare Jr. and DMX channel assignments for RGB strobe effects.
DMX channel assignments for RGBW strobe effects and pixel control.
Selection and description of various built-in demonstration scenes for testing.
Configuration options for DMX Loss, Fan, Display, Thermometer, and Fade Time.
Configuration settings for Smart Fade, Fixed Fade, Gamma, Async Strobo, and more.
Setting the DMX source (wired or wireless) specifically for the Flare Jr. model.
Fundamental concepts of DMX-512 control, addressing, and daisy-chaining.
Recommended procedures for cleaning and maintaining the fixture for optimal performance.
Information regarding the limited warranty and the process for returning products.
Contact details for general inquiries and 24/7 technical support.
To Next Page
