What to do if SolarMax SHT shows abnormal behavior?
If your SolarMax Inverter shows other abnormal behavior, disconnect both AC and DC power and wait for at least 10 minutes. Then, reconnect the DC and AC power. If the issue continues, it's recommended to contact your dealer or the SolarMax service center.
Why is my SolarMax SHT not producing power?
If your SolarMax Inverter is not producing power, ensure that the grid is present and properly connected. Also, ensure that there is sufficient irradiance. Finally, verify the configuration of the PV generator.
How to improve the production of my SolarMax Inverter?
If the production of your SolarMax Inverter is lower than expected, make sure the inverter has enough air circulation and is not under direct sunlight. Also, check that the heatsink is clean and not obstructed. Finally, verify the configuration of the PV generator.
What to do if all LEDs are off on SolarMax Inverter?
If all the LEDs on your SolarMax Inverter are off, check if the DC disconnector has been turned on. If you're using an external DC box, inspect the cables, connectors, and fuses.
To Next Page
General
