Need help?Do you have a question about the Solartech PD600 and is the answer not in the manual?
General| Maximum Power | 600W |
|---|---|
| Efficiency | Up to 98% |
| Voltage | 12V/24V auto |
| Output Voltage | 12V/24V |
| Protection Features | Overload, short circuit, reverse polarity |
| Cooling Method | Natural convection |
Illustrates the controller's enclosure sockets and external connections for proper wiring.
Details the wiring connections for solar array (P, N) and motor (M) with specific wire descriptions.
Explains wiring for well/tank floats and recommends the Normally-Open type for better fault diagnosis.
Explains the purpose of earthing for operator safety and lightning surge protection and the connection method.
Describes the controller's operation panel, including LED indicator lights and keys.
Details the functions of the RUN, STOP, DATA, MODE, PROG, ENTER, and reset key combinations.
Guides on how to view various operational parameters like voltage, current, power, and temperature.
Details the process of accessing, viewing, and modifying control parameters.
Explains how to enter the parameter modification interface to change the pump's target operating frequency.
Provides a table describing specific parameters like mode setting, fault records, and water level float settings.
Lists common fault codes, their possible causes, and recommended countermeasures for system faults.
To Next Page