Electrical Connections
46
■ Battery connection steps
Step 1. Prepare a 16-25 mm² or 35-50 mm² battery power cable, nd the OT
terminals in the accessory bag.
Power line
16-25 mm
2
(3.0 kW to 4.0 kW)
35-50 mm
2
(4.6 kW to 6.0 kW)
Diagonal pliers
10 mm
Step 2. Strip the insulation layer (length:10 mm) at one end of the power line.
Step 3. Insert the stripped cables into the OT terminals respectively and crimp
the terminals tightly.
Step 4. Loosen the waterproof connector
.
+
-
-
-
+
+
To Next Page
Loading...
