Setting
75
■
Error Infor
Here you can view the current faults and the historical faults. There are a total
of ve pages with a total of 20 records.
Setting
Basic
Advanced
Super Settings
■
Setting
The initial password is 0000 which is for basic settings and should be
changed for theconsideration of account security. The "Basic" and "Ad-
vanced" buttons will appear if a password with advanced permission from the
installer is used. All "Basic", "Advanced", and "Super" buttons will appear if a
password with factory permission is used.
Users can press the up or down buttom to switch pages. Tap the"√" on the
screen or press the Enter button after completing the modication to save
the setup.
a) Basic settings
Data Time
Basic
Language
Mute
Discharge Min Voltage
Consume Power
Battery Sleep
Charge&Discharge Period
Reset Password
Communication
RS485 Addr
RS485 Baud
4800
9600
19200
Meter/CT Install State
DI Function Set
DO Function Set
Meter Direction Check
When switched to Paki-
stan safety/ selected 3
Pakistani work modes:
When switched to
IEC61727 safety/ select-
ed other 6
work modes:
Max Charge Current
From Grid
Battery Sleep
Charge Period
Battery Discharge Start Voltage
Battery Charge Start Voltage
Battery Charge Source Mode
Generate Port As Load Port
Dual EPS Load Battery Voltage
To Next Page
Loading...
