Safety
05
Danger!
The inverter can not be operated when it is running.
Warning!
Risk of electric shock!
Strictly follow relevant safety specications for product installation and testing.
During installation, operation or maintenance, read carefully and follow the in-
structions and precautions on the inverter and user manual. If the operation is
incorrect, it may cause personal and property losses. Keep the user manual
properly after use.
This inverter can only use the accessories sold and recommended by us, oth-
erwise it may cause re, electric shock or casualties.
Without the authorization of our company, you may not open the inverter cov-
er or replace the inverter parts, otherwise the warranty promise of the inverter
will be invalid.
The use and operation of the inverter must be carried out in accordance with
the instructions in this manual, otherwise this protection will fail and the war-
ranty of the inverter will also fail.
During working, the inverter surface temperature may exceed 60°C, make
sure the inverter cools down before touching, and make sure children can not
touch.
When exposed to sunlight, photovoltaic arrays generate dangerous high DC
voltages. Follow our instructions, otherwise it will be life-threatening.
All DC and AC power sources must be disconnected from the inverter for at
least 5 minutes before any wiring or electrical operation is performed on the
inverter to ensure complete isolation of the inverter and avoid electric shock.
A photovoltaic module used on the inverter must have a IEC61730A rating,
and the total open circuit voltage of the photovoltaic string / array is lower
than the maximum rated DC input voltage of the inverter. Any damage caused
To Next Page
Loading...
