SolaX Power X1 Series User Manual

4) On-grid
5) EPS
6) Meter/CT
Here you can see the data showing the meter or the CT.
Ø History Data
Setting
Setting
EPS
On-grid
U 0.0V
I 0.0A
p 0.0W
Meter/CT
Meter/CT-1
2 Meter/CT-
>
Meter/CT
Meter/CT-1
4000w
>
Meter/CT
Meter/CT-2
4000w
>
1)
2)
3)
4)
5)
History Data
EPS
Meter/CT-1
Meter/CT-2
On-grid
Error Log
1) On-grid
2) EPS
U 0.0V
I 0.0A
86
87
P 0VA
0.0 kWh
EPS
Total:
0.0 kWh
EPS
Today：
On-grid
On-grid
0.0 kWh
0.0 kWh
On-grid
On-grid
0.0 kWh
0.0 kWh
Input Total
Input Today
Output Today
Output Total
Here you can see the EPS output of the inverter today and the total
output.
Here is a record of the power capacity of the inverter connected to
the grid today and the total.
Press up and down to select, press Enter to conrm selection, and
press ESC to return to the menu.
The history data contains five pieces of information: on-grid power
of the inverter, EPS power generation, power of the meter/CT and
error logs.
Here you can see the voltage, cu rrent, freq uenc y and power of
the inver ter when it is disconnected from the grid.
Here you can see the voltage, current, frequency, and power of the grid.

SolaX Power X1 Series Specifications

General

Protection Rating	IP65
AC Voltage Range	180V-280V
THDi	<3%
Warranty	5 years
MPPT Voltage Range	520V
Number of MPPTs	1
Nominal AC Voltage	230V
Power Factor	0.8 leading to 0.8 lagging
European Efficiency	97%
Protection	DC Reverse-Polarity Protection, AC Short-Circuit Protection
Operating Temperature Range	-25°C to +60°C
Cooling	Natural
Communication	WiFi, Ethernet, GPRS
Frequency	50Hz / 60Hz