34
15. Telnet
Using the radio’s IP address, the system can be managed using a Telnet connection. Access login
and password are the same for a Telnet session as for the HTTP GUI.
Sessions can be initiated from both the Ethernet and RF side of the Network, and multiple sessions
are permitted.
Commonly used commands include:
>status
>get rssi
>get counters
>show log
>uptime
>get <to see read commands>
>set <to see write commands>
>? <to see other commands>
See Appendix B for a complete Telnet command set, syntax and usage.
To Next Page
Loading...
