Solectek skyway - Appendix B: Telnet Commands; Telnet Commands

46
Appendix B: Telnet Commands
Command R/W Default Usage Description
acl RW enabled
acl
add [mac
] [client
-
name]
acl del [mac]
acl show
acl [enable | disable]
Base Station only
Add/Delete/Show entries in the RF
access control list.
Enable or Disable acl function
arp RW
arp [OPTION]
Options:
-a Display (all) hosts
-s Set new ARP entry
-d Delete a specified entry
-v Verbose
-n Don't resolve names
-i IF Network interface
-D Read [hwaddr] from given
device
-A, -p AF Protocol family
Manipulate the system ARP cache
audioalign RW 1800 secs
set audioalign
[duration_secs]
show audioalign
Set/show Audio Antenna Alignment
duration in seconds. Duration 0
disables alignment tone.
bridge R
show
bridge
Show Bridge Table
bw RW 20
set
bw
[20 | 40]
show bw
Set RF bandwidth in MHz
chanplan R Varies by
Model, Region
show chanplan Show channel plan.
cfgdiff R cfgdiff [boot] Shows differences between current
configuration and default
clear W
clear
Clears all Ethernet & RF Port
counters
clearevtlog W
clearevtlog
Clear event log
clientcfg R/W
clientcfg <mac> [
--
name
<name>] [
--
dlmod <dlmod>] [--dlstr <dlstr>] [--ulmod
<ulmod>] [--ulstr <ulstr>]
Show status of and make changes
to configured clients
clientstat R
client
stat
<mac>
Show status of connected clients