System Resources
The system resource usage can always be checked in the
Pro Tools
®
software under menu: Window|System Usage:
Firmware Updates
The Delta-link MADI HD features a USB connector on the
back panel to allow for firewire updates or settings
modifications.
When a new firmware update is released, an update utility will
be available from the downloads section of the Solid State
Logic Support Website.
NOTE: The interface is USB 1.0 compatible only.
NOTE: Please do not switch the unit off, disconnect the
USB cable or switch off the controlling computer whilst
upgrading the firmwire. Doing so may leave the Delta-Link
MADI HD in an unusable state.
Technical support
If you encounter problems that you cannot solve, please check
out our online knowledge base at http://solid-state-logic-
en.custhelp.com for trouble shooting tips or to get assistance
from our technical support team.
24
7. Troubleshooting
To Next Page
Loading...
