17
General information
The Delta-Link MADI HD can work with Pro Tools
®
HD systems running on a Windows PC or Macintosh OS X computer.
Using the Delta-Link MADI HD with the Pro Tools
®
software is generally straightforward. However, there are a few points
to be aware of:
• The Delta-Link MADI HD appears in the Pro Tools
®
software as four Digidesign
®
192 I/O units, except when operating
at 176.4 or 192kHz, in which case it appears as two Digidesign
®
192 I/O units.
• The MADI inputs and outputs appear in the Pro Tools
®
software as Analogue or Digital (AES/EBU or ADAT) inputs and
outputs belonging to these four Digidesign
®
192 I/O units. Therefore, you will not find any MADI inputs or outputs listed
in the Hardware Setup page of the Pro Tools
®
software (select Setup|Hardware). Please use the inputs and outputs that
are listed, regardless of their denomination – they are really your MADI inputs and outputs – and do not select “None”.
6. Pro Tools
®
Software
To Next Page
Loading...
