SOLINTEG ECA-B Series - Important Safety Instructions

This document contains instructions including but not limited to installation, electrical con-
nection, operation and maintenance of Solinteg ECA-B EV charger and warnings that must
be followed when installing and using the Electric Vehicle Supply Equipment (EVSE).
Before installing or using the EVSE, read this entire document as well as WARNING and
CAUTION markings in this document.
※ IMPORTANTSAFETYINSTRUCTIONS
The symbols used have the following meaning:
※ SafetyInstructions
WARNING: RISK OF PERSONAL INJURY
WARNING: RISK OF ELECTRIC SHOCK
WARNING: RISK OF FIRE
CAUTION: RISK OF DAMAGE TO THE EQUIPMENT
•EV charger must be installed, adjusted, and repaired only by a licensed electrician.
•Make sure that the materials used, and the installation procedures follow local regulation
codes and safety standards.
•The information provided in this manual in no way exempts the user of responsibility to
follow all applicable codes or safety standards.
•This document sees only as a guide to use, and all statements, information and recom-
mendations in this document do not constitute any express or implied guarantee.
•This document provides instructions for Solinteg EV charger (ECA-B series) and should
not be used for any other product.
•The breakers of all power supplies are requested to be o before installing this product,
which means the breaker at both grid side and batte side should be o while DC switch
of the inveer should be powered o.
•Before installation or use of this product, review this manual carefully and consult with a
licensed contractor, licensed electrician, or trained installation expe to make sure of com-
pliance with local regulation codes and safety standards.