7
User Manual
ECA-B Series
•Protective measures (PPE): Please wear personal protective equipment (PPE) when con-
ducting installation work.
•Please wear insulating gloves when installing wires and electrical components to avoid
damage arising from electrostatic discharge.
•Please wear the anti-static safety shoes of Level S3.
•Please wear goggles while drilling a hole to prevent dust or other paicles from getting
into eyes.
•Please wear safety earmus while drilling a hole to protect ears from noise.
1.1.4 Safety Protection Measures
•Please divide different materials into recyclable materials, general waste and special
waste before handling.
•Please abide by local laws and regulations and relevant provisions when recycling or
handling products, individual components and packages.
•The disposed products with WEEE logos must be delivered to a place in which electrical
and electronic devices are separately collected.
※ 1.2Disposing
Solinteg Power Co., Ltd. has the right not to undeake quality assurance in any of the fol-
lowing circumstances:
① Damages caused by improper transpoation.
② Damages caused by incorrect storage, installation or use.
③ Damages caused by installation and use of equipment by non-professionals or un-
trained personnel.
④ Damages caused by failure to comply with the instructions and safety warnings in this document.
⑤ Damages of running in an environment that does not meet the requirements stated in
this document.
⑥ Damages caused by operation beyond the parameters specied in applicable technical
specications.
⑦ Damages caused by unauthorized disassembly, alteration of products or modication of
software codes.
⑧ Damages caused by abnormal natural environment (force majeure, such as lightning,
eahquake, re, storm, etc.).
⑨ Any damages caused by the process of installation and operation which don't follow the
local standards and regulations.
⑩ Products beyond the warranty period.
※ 1.3Statement
To Next Page
Loading...