To Next PageTo Next PageWhat does 'OV-TEM' mean on my SOLIS S5-EH1P3.6K-L Inverter?
If your SOLIS Inverter displays 'OV-TEM', check the inverter's surrounding ventilation. Also, see if direct sunlight is hitting the inverter during hot weather.
What to do if SOLIS S5-EH1P3.6K-L shows a Surge Alarm?
If your SOLIS Inverter displays a 'Surge Alarm', it indicates a surge on the grid side. First, try restarting the device. If the alarm persists after restarting, it means the issue hasn't been resolved and you should contact the manufacturer's customer service for further assistance.
Why does my SOLIS S5-EH1P3.6K-L show OV-G-V01 error?
If your SOLIS Inverter shows the error 'OV-G-V01', it means the grid voltage is exceeding the upper voltage range. To address this: 1. Check to see if there are any known issues with the power grid in your area. 2. Make sure the AC cable is securely and correctly connected. 3. Restart the inverter to see if the problem goes away.
How to fix OV-TEM (1032 DATA:0000) error on SOLIS S5-EH1P3.6K-L Inverter?
If your SOLIS Inverter displays 'OV-TEM (1032 DATA:0000)', it means the module is overheating. Check if the inverter has enough space around it for proper ventilation. Also, check that the installation is correct according to the manual.
Why does my SOLIS Inverter LCD show initializing all the time?
If your SOLIS Inverter displays 'LCD show initializing all the time', check if the connectors on the main board or power board are securely fixed. Also, check if the DSP connector to the power board is fixed.
How to resolve 'OV-DC01/02/03/04' error on SOLIS Inverter?
If your SOLIS Inverter displays 'OV-DC01/02/03/04', reduce the number of modules in series.
What does INI-FAULT (1031 DATA:0000) mean on my SOLIS S5-EH1P3.6K-L?
If your SOLIS Inverter displays 'INI-FAULT (1031 DATA:0000)', it means there is an AD zero drift overlink. Restart the system to see if the error disappears.
How to fix ARC- FAULT (1041 DATA:0000) on SOLIS S5-EH1P3.6K-L?
If your SOLIS Inverter displays 'ARC- FAULT (1041 DATA:0000)', it means there is an AFCI failure. Check that all connections within your PV system are tight. If further adjustment is needed, arc fault settings can be changed in advanced settings.
What does UN-Vbatt mean on my SOLIS S5-EH1P3.6K-L?
If your SOLIS Inverter displays 'UN-Vbatt', it means that battery overvoltage was detected. Restart the system and check if the fault persists. If it is still not eliminated, please contact the manufacturer's customer service.
How to fix IGBT-OV-I (1048 DATA:0000) error on SOLIS S5-EH1P3.6K-L?
If your SOLIS Inverter shows 'IGBT-OV-I (1048 DATA:0000)', which means there is an IGBT overcurrent, try restarting the system and see if the error clears.
General| Model | S5-EH1P3.6K-L |
|---|---|
| Type | Hybrid Inverter |
| Rated Power | 3.6kW |
| Max. DC Input Power | 5.4kW |
| Rated AC Output Power | 3.6kW |
| Rated Grid Voltage | 230V |
| Grid Voltage Range | 180-280V |
| Rated Grid Frequency | 50/60Hz |
| Total Harmonic Distortion (THD) | <3% |
| DC Switch | Yes |
| Ingress Protection | IP65 |
| Cooling | Natural Convection |
| Weight | 17.7 kg |
| Dimensions | 310 x 563 x 219 mm |
| Operating Temperature Range | -25°C to +60°C |
| Communication | RS485 |
| Protection | over temperature, over voltage |
