2.Press or to change the option
3.While your preferred option appears, press to confirm your
selection.
Set the “beep” voice on or off while pressing the button.
1.While the LCD shows press and the option menu
will flash.
2.Press or to change the option
3.While your preferred option appears, press to confirm your selection.
Enable the compass function or disable it.
1.While the LCD shows press and the option menu
will flash.
How to do the custom setting?
3.3 If you prefer OFF, press while a flashing displayed and the
backlight will be always off.
Set the indicators of the GPS signal acquisition, logging and the
Bluetooth are on or off
1.While the LCD shows press and the option menu
will flash.
22
To Next Page
Loading...
