Operating and Maintenance Instructions
ENGLISH 19
10.8 Remove the fuel filter
We recommend to have the fuel filter (32)
changed annually by a specialized service centre.
A trained mechanic can carefully remove the
fuel filter via a wire loop through the fuel tank
filler. Ensure that the thicker part of the fuel
hose on the tank wall is not drawn into the fuel
tank.
10.9 Shutdown and storage
Drain and clean the machine according to the
instructions provided in section 10.3 "Emptying
and cleaning liquid tank". The machine should
be stored in a dry and secure place. The petrol
tank should be full. Do not allow a fire or open
flame in the vicinity. Prevent unauthorized
access to the machine, particularly by children.
If the machine is expected to be out of action
for longer than three weeks prepare the
machine for storage as follows:
• Drain and clean the fuel tank in a well
ventilated area.
• Start and run the engine with the fuel tank
empty until the carburettor is dry and the
engine stops. If the engine is not run dry, oil
residue from the fuel mix are likely to block
the carburettor jets which makes a re-start at
a later stage more difficult.
• Thoroughly clean the machine, particularly
the air intake system, cylinder cooling fins, air
filter and around the fuel tank filler inlet.
• Store the machine in a dry and secure place as
described above.
Fig. 17
To Next Page
Loading...
