Guarantee ; Parts subject to wear and tear
ENGLISH 21
11. Guarantee
The manufacturer guarantees problem free
quality and will cover the cost of replacing parts
which are found to be faulty in material or show
manufacturing defects within the prescribed
guarantee period after the date of purchase.
Please note that specific guarantee conditions
may differ from country to country. When in
doubt, please ask the vendor of the goods. The
vendor of the product is responsible for
guarantee applications.
We hope you will understand that we cannot be
liable for damage resulting from these causes:
• Non-compliance with operating
instructions.
• Neglecting required maintenance and
repair jobs.
• Damage caused by improper carburettor
adjustment.
• Wear from normal use.
• Obvious overload by continuously
exceeding the upper performance limit of
the product.
• Using non-approved tools.
• Use of force, improper treatment, misuse
and accidents.
• Damage from excessive heat due to dirt
build up around the cooling fan housing.
• Attempted adjustments and repairs by non-
qualified persons.
• Use of unsuitable spare parts or non-
original parts if such parts are the cause of
the damage.
• Use of unsuitable or stale fuel.
• Damage caused by using the product in the
hire or rental industry.
Normal cleaning, adjustments or maintenance
jobs cannot be claimed as part of the guarantee.
All guarantee work must be carried out by a
service centre authorized by the manufacturer.
12. Parts subject to wear and tear
Various parts are subject to application-specific
wear or to normal wear and must be replaced in
good time if necessary. The following parts are
subject to normal wear and are not covered by
the manufacturers guarantee:
• Air filter
• Fuel filter
• All rubber parts which come into contact
with the spray liquid
• Spark plug
• Starter
In the best interest of continued technological
progress we reserve the right to change the
design and configuration of any product
without prior notice. For that reason, no claims
can be accepted with reference to text and
illustrations in this manual.
To Next Page
Loading...
