ENGLISH 2
Prelude
We congratulate you on the purchase of
your new high quality SOLO product and hope
that you are well satisfied with it.
Your high pressure sprayer is driven by a
high performance, modern combustion engine.
A single cylinder two-stroke engine with Nikasil
coated cylinder walls in conjunction with proven
SOLO technology ensures high performance, low
fuel consumption and a long operational life.
SOLO constantly strives to further develop its
products. Consequently, SOLO must reserve the
right to make changes in form, shape, fittings
and technology.
No claims can be derived from any of the
illustrations or from information contained in
these operating instructions.
To maintain satisfactory operation and high
performance of this product over a long period,
all operating instructions and maintenance
guide lines should be strictly adhered to.
For any further questions or further
information required regarding this product,
please contact your specialist dealer who will be
pleased to assist.
Symbols
The following symbols are used in the manual
and on the product:
In the manual:
Read instruction manual
Special care required
Wear eye and ear protection
Do not smoke!
No open flame!
Wear protective gloves!
Toxic exhaust gas emission!
On the machine:
Fuel tank lid
T- Idling set screw
The choke is closed when the lever
points in the direction as shown by the
arrow (starting with cold engine)
L- Low speed mixture screw
H- High speed mixture screw
Declaration of Conformity
In accordance with EC Guide Lines 98/37/EG,
2000/14/EG and 89/336/EWG (modified with
92/31/EWG),
SOLO Kleinmotoren GmbH,
Stuttgarter Strasse 41,
D-71069 Sindelfingen
declares that the company assumes sole responsibility
for the product and confirms that the product
complies with the requirements of the machinery
guide lines.
Sound power level (Din45635)
Guaranteed 95 db(A)
Measured 94,2 db(A)
Sindelfingen,
1st June 2004
SOLO Kleinmotoren GmbH Wolfgang Emmerich
Managing Director
To Next Page
Loading...
