DISTRIBUTION: INTERNAL + SOLOPROTECT CUSTOMERS
SoloProtect ID US: User Guide
US SoloProtect ID User Guide v2.0 d1909189
© SoloProtect Ltd, 2018 Page 21 of 31
Figure 13: GNSS fix – Device Check
Your GNSS location is also requested and transmitted during any open Red Alert Voice call.
You should always perform a Device Check and get a GNSS location fix after turning your SoloProtect
ID on or moving outside from indoors.
GNSS requires a clear line of sight to the sky, not obstructed by buildings or other obstacles. The
GNSS location operation will not work whilst the unit is indoors.
4.1.10 Multifunction Buttons – UK*
The 3 multi-function buttons on the front of the device are usually covered by your ID Card. These
buttons are not designed for discreet use or to be deployed as part of a situation where you require
assistance due to your safety being compromised.
Your SoloProtect ID can be configured so that 3 buttons underneath the ID card can be used to:
• Make a non-emergency phone call to a pre-defined phone number when you press a button
• Send a non-emergency SMS to a pre-defined phone number when you press a button
• To log to a SoloProtect Mobile Management Platform (MWM)*
*MWM - please contact your Business Development Manager for more details of this service
For example, these buttons can be programmed to let a Manager or authorised person know you have
returned safely home after a shift or you have arrived safely at a visit.
To Next Page
Loading...