soloprotect ID - Vibration Patterns

DISTRIBUTION: INTERNAL + SOLOPROTECT CUSTOMERS
SoloProtect ID US: User Guide
US SoloProtect ID User Guide v2.0 d1909189
© SoloProtect Ltd, 2018 Page 25 of 31
4.3.2 Vibration Patterns
The following table summarises the vibration indications given by your SoloProtect ID. The Vibration
patterns aid the use of SoloProtect ID for the visually impaired.
SoloProtect ID Action
Vibration pattern
Confirmation of switch to Power On mode
Single short pulses
Confirmation of switch to Power Off mode
Two short pulses
Confirmation of start of Device Check
Three short pulses
Confirmation that neither the network
coverage or battery strength are red
Single short pulse
Confirmation that the latest GNSS location
fix gave a valid location
Single short pulse
Confirmation of start of Amber* or Red Alert
Three short pulses
‘Heartbeat’ confirmation of Red Alert call
still active
Two short pulses (at
configured interval)
Confirmation to commence voice message
on Amber Alert*
Single short pulse
End of Amber Alert Timer* period – action
required or a Red Alert will follow
Five long pulses
Confirmation of extension of Amber Alert*
period
Single short pulse
Confirmation of termination of Amber Alert*
Two short pulses
Confirmation of termination of Red Alert
Two longer pulses
Confirmation of start of Multi-Function call
(ready2talk)
Two short pulses
Confirmation of start of Multi-Function SMS
Three short pulses
Incapacitation (ManDown) Pre-Alert warning
Continual long pulses
and beeps for the
duration of the Pre-
Alert period
Confirmation of start of Incapacitation
Five short pulses
‘Heartbeat’ confirmation of Incapacitation
Red Alert call still active
Three short pulses (at
configured interval)
ANY call requested but out of coverage –
unable to make Voice call
Single long pulse
*Amber Alert is known as a ‘Status Check’ in the USA and Canada
Table 4: Vibration indication Table