DISTRIBUTION: INTERNAL + SOLOPROTECT CUSTOMERS
SoloProtect ID US: User Guide
US SoloProtect ID User Guide v2.0 d1909189
© SoloProtect Ltd, 2018 Page 31 of 31
a device defined under standard BS8484 for the protection of
workers who have risk of attack or incapacitation hazards whilst
operating out of line of sight of co-workers.
an event/status where the user is physically incapacitated – usually
occurring following a slip, trip, or fall.
a high priority Incapacitation event requiring an immediate respond
from the ARC
This receives and stores all mapping/logging data from the device so
it can be accessed by the ARC (Alarm Receiving Centre) if needed.
Mobile Workforce Management – a web based mapping and alerting
platform provided to SoloProtect customers to provide enhanced
features for their user base.
Near Field Communications – an RF technology that allows two
items to communicate when in close proximity.
a high priority user triggered event requiring an immediate respond
from the ARC
Subscriber Identity Module – a secure store for the subscriber
information (e.g. the IMSI) for mobile equipment (e.g. GSM modem
or phone).
Short Message Service – a text-based message facility for GSM
phones.
SoloProtect – A lone worker device manufacturer and monitoring
services provider.
Transmission Control Protocol/Internet Protocol – the standardized
suite of protocols used to connect hosts over the internet. It provides
end-to-end connectivity specifying how data should be formatted,
addressed, transmitted, routed and received at the destination.
a User Profile is a set of information about the device user stored at
the ARC for the purpose of assisting the operator in handling any
Alert.
Table 6: Glossary of Terms
To Previous Page
