Solt GGSSL60DR2S - Operating Your Rangehood; Cleaning & Maintenance

12
Operating Your Rangehood
Checking the valve installation
Hold the check valve with your hands, align the box gap,
put in the check valve,
and then rotate until three angles of the valve are locked.
Installation is complete.
Cleaning the cooker hood:
To protect the main body of your rangehood from
corrosion or stains, the cooker hood should be cleaned
with hot water with a non-corrosive detergent every
two months. For stubborn stains or marks, you can try
using a specific stainless steel cleaner available from
most supermarkets.
Warning!
• Do not use a corrosive detergent or abrasive cloths as
they will damage the body.
• Keep the motor and mechanics free from water.
• Always switch the power off at the outlet and unplug
the rangehood before cleaning.
• If your rangehood plug or cord is damaged, please
ensure your rangehood remains unplugged and contact
After Sales Support for further assistance.
• If you’re using a carbon filter, it should never be exposed
to heat.
Cleaning and Maintenance
USE
Operation
Check beforehand
Check the safe condition of the appliance：
 Check whether there are visible defects.
 Check that all parts of the appliance have been securely fitt
ed.
Switching on/off
Motor Operation
 [ ]=Off
 [ ]=Low Power Setting
 [ ]=High Power Setting
 In the right part of the cooker hood. (For some models)
 There are 2 speeds for the motor and on off switch of the lamp.
 Locker switch for operation.
Light Operation
 [ ]=Off
 [ ]=On
CHECK VALVE INSTALLATION
Hold on check valve with your hands, align the box gap, put in the check valve , and then spin
to a certain angle until three anglesof the valve are stuck. Installation is complete.
MAINTENANC
8
BEFORE FIRST USE
To ensure that the rangehood is in a safe condition:
• Check whether there are visible defects.
• Check that all parts of the appliance have been securely fitted.
OPERATION
Your Slide-out Rangehood features switch button controls with two speed levels of extraction.
Motor Operation Switch
The Low Power Setting is recommended for ventilation in standard cooking operations.
When there is a high density of smoke or steam produced, it is recommended to select
the High Power Setting for the most effective ventilation.
[ ] = Off
[ | ] = Low Power Setting
[ || ] = High Power Setting
Light Operation Switch
Select this button to turn the light on and off.
[ ] = Off
[
USE
Operation
Check beforehand
Check the safe condition of the appliance：
 Check whether there are visible defects.
 Check that all parts of the appliance have been securely fitt
ed.
Switching on/off
Motor Operation
 [ ]=Off
 [ ]=Low Power Setting
 [ ]=High Power Setting
 In the right part of the cooker hood. (For some models)
 There are 2 speeds for the motor and on off switch of the lamp.
 Locker switch for operation.
Light Operation
 [ ]=Off
 [ ]=On
CHECK VALVE INSTALLATION
Hold on check valve with your hands, align the box gap, put in the check valve , and then spin
to a certain angle until three angl esof the valve are stuck. Installation is complete.
MAINTENANC
8
] = On
USE
Operation
Check beforehand
Check the safe condition of the appliance：
 Check whether there are visible defects.
 Check that all parts of the appliance have been securely fitt
ed.
Switching on/off
Motor Operation
 [ ]=Off
 [ ]=Low Power Setting
 [ ]=High Power Setting
 In the right part of the cooker hood. (For some models)
 There are 2 speeds for the motor and on off switch of the lamp.
 Locker switch for operation.
Light Operation
 [ ]=Off
 [ ]=On
CHECK VALVE INSTALLATION
Hold on check valve with your hands, align the box gap, put in the check valve , and then spin
to a certain angle until three anglesof the valve are stuck. Installation is complete.
MAINTENANC
8