Safety
SP25-55_User Manual_B8_EN_2012-11-06 6/32
2 Safety
2.1 Safety in general
Please read the following safety information and instructions before you put the SOLPLUS inverter
into operation for the first time, in order to avoid personal injuries and/or property damage. These
instructions must be complied with at all times.
Do to attempt to install or put the SOLPLUS inverter into service until you have read through all the
documentation supplied thoroughly. Read through these safety instructions and all other user
instructions and tips before you begin work with this device.
If you sell on, hire out or pass on this device to someone else in some other way, make sure that you
give the new user these safety instructions, too.
2.2 Intended use
This device must be used only for the purpose described in this User Manual. The inverter is designed
for use in grid-connected photovoltaic installations. All safety regulations must be complied with. All
installation work must be carried out precisely as described in this manual. No modification of any kind
to or in this device or to its external wiring is permitted. Any such modification could lead to serious
safety problems and danger to life and limb.
2.3 Safety instructions
Warning!
Improper use of these devices, non-observance of the warnings given in
this manual and improper tampering with the safety functions can lead to
property damage, personal injury, electric shock and, in extreme cases,
death.
Caution!
The surface of the inverter housing can become hot when the inverter is in
operation. Very hot! Do not touch!
Danger!
High voltage due to incorrect connection! Risk of fatal or bodily injury from
electric shock.
To Next Page
Loading...