User Manual
10 SolwaveOvens.com
Cooking
Displays
DISPLAY DESCRIPTION
READY
Displays when oven control
will accept entries.
00:00
Displays cooking time.
If stage cooking is
programmed, total cooking
time is displayed.
hold 0%
DEFR 20%
MED 50%
HI 70%
Displays the current
microwave power level. If no
display is shown, the oven is
running at full power (100%).
power
Displays while the oven is
generating microwave energy
during a cooking cycle.
Programming
Displays
DISPLAY DESCRIPTION
P:O
Displays when oven enters programming
mode for single digit key memory only.
P
Displays when oven enters programming
mode for double digit key memory.
2 keys must be pressed to enter a
program.
OP:--
Displays when oven is in user option
mode. User options can then be set or
specified.
CF:
Displays with a numerical Cooking Factor
when X2 key is pressed. Cooking Factor
is the percentage by which cooking time
increase when using X2 key to cook
multiple portions (1=10%, 2=20%, 3=
30%, etc.).
P:--
1
Displays briefly when programming
a specific cooking stage. Number (1-
4) indicates the stage that is being
programmed.
The display is used for many different models of microwaves. Depending on the model, certain words or symbols may
never be highlighted or become visible.
To Next Page
Loading...
