User Manual
14 SolwaveOvens.com
User Options
Saving Changes
• In order for any changes to be saved, the START key must be pressed after selecting an option.
• Shutting the oven door or pressing the STOP/RESET key will not save changes.
Changing User Options
Options such as single or double key programming, beep volume, and maximum
cooking time can be changed to suit individual preferences. To change options:
1. Open oven door.
• If door is closed or STOP/RESET key is pressed before programming is complete, changes are discarded and
microwave exits programming mode.
2. Press and hold key 2 for approximately 5 seconds.
• This begins options mode.
• Microwave will beep and 0P: -- displays. Microwave is now in programming mode.
3. Press number key that controls option to be changed.
• See table below for options.
• Current option will display.
4. Press number key again to change the option.
• Each time key is pressed, option will change.
• Match number code displayed with descriptions for desired option.
5. Press START key to save changes.
• 0P: -- shows in display.
• To change additional options, repeat steps 3 and 4.
• Changes appear after door is closed or STOP/RESET pad is pressed.
To Next Page
Loading...
