Solwave AMERI Series - Page 15

User Manual
SolwaveOvens.com 15
User Option Codes
• Default values marked in bold.
NUMBER PAD DISPLAY OPTIONS
1: End of Cycle Beep
OP:10
OP:11
OP:12
3 second continuous beep.
Continuous beep until door is opened.
5 beep bursts until door is opened.
2: Speaker Volume
OP:20
OP:21
OP:22
OP:23
Eliminates beep.
Sets volume to low.
Sets volume to medium.
Sets volume to high.
3: Key Beep
OP:30
OP:31
Prevents beep when pad is pressed.
Allows beep when pad is pressed.
4: Keyboard Enable Window
OP:40
OP:41
OP:42
OP:43
15 seconds after door is opened, keyboard disabled.
30 seconds after door is opened, keyboard disabled.
1 minute after door is opened, keyboard disabled.
2 minutes after door is opened, keyboard disabled.
5: Add Time During Heating
OP:50
OP:51
Prevents adding heating time while oven is heating.
Allows heating time to be changed while oven is heating when a
memory key is pressed.
6: Reset to Ready Mode
OP:60
OP:61
Opening door does not reset oven back to ready mode.
Opening door resets oven back to ready mode.
7: Maximum Heating Time
OP:70
OP:71
Allows 60 minutes of heating time.
Allows 10 minutes of heating time.
8: Manual Operation
OP:80
OP:81
Allows use of pre-programmed keys only.
Allows use of manual time entry and pre-programmed keys.
9: Double Digit Operation
OP:90
OP:91
Allows 10 (0-9) pre-programmed keys.
Allows 100 (00-99) pre-programmed keys.
0: Clean Filter Message
OP:00
OP:01
OP:02
OP:03
Do not display message.
Display message for 24 hours every 7 days.
Display message for 24 hours every 30 days.
Display message for 24 hours every 90 days.