User Manual
SolwaveOvens.com 11
Oven Controls
Interrupting Operation
Open the oven door or press STOP/RESET key to interrupt operation. The display will continue to show the countdown
time. Close door and press START key to resume oven operation.
Manual Time Entry
To cook food using a specific entered time and power level.
1. Open oven door and place food in oven. Close door.
• READY displays. Fan and light will turn on.
2. Press TIME ENTRY key.
• READY and 0000 display.
• If pad does not work, open and close oven door and try again.
3. Enter cooking time by using the numbered keys.
4. Press a power level key to change power level if desired.
• POWER LEVEL displays with the power setting.
• 00 indicates 0% microwave power, 20 indicates 20%, 50 indicates 50% and 70 indicates 70% microwave power.
If a number is not displayed with POWER LEVEL the microwave is set to full power.
5. If stage cooking is desired, press TIME ENTRY key and repeat steps 3 through 4.
• Display changes to cook time and power level for the next stage.
6. Enter cook time and power level as in steps 3 and 4.
• To add another cooking stage press TIME ENTRY key again.
• Up to four different stages can be programmed.
7. Press START key.
• Oven operates and time counts down.
• POWER, COOK LEVEL, and cooking time display.
8. At end of cooking cycle oven beeps and shuts off.
Programmed Keys
To cook food using a specific entered time and power level.
1. Open oven door and place food in oven. Close door.
• READY displays. Fan and light will turn on.
2. Press desired key.
• For single key entry, press only one key.
• For double key entry, press the two keys, in order, of the double
digit number for the desired cooking sequence.
• To change single or double key entry option, see User Options
section in this manual.
3. Oven begins to cook.
• POWER, power level and total cooking time display. If power level
does not display, microwave is cooking at full power.
• For additional cooking time, press preprogrammed key again to
begin cooking sequence again.
4. At end of cooking cycle oven beeps and shuts off.
Factory Preset Programs
KEY TIME POWER
1 00:10
100%
2 00:20
3 00:30
4 00:45
5 01:00
6 01:30
7 02:00
8 03:00
9 04:00
0 05:00
To Next Page
Loading...
