Motorisation of Window Coverings
using Somfy Motors
Motor Range
LS40 Motor
Suitable for roller, roman, 50mm venetian and timber venetian blinds
Power Cable
Blue = Neutral
Brown = Active (direction 1)
Black = Active (direction 2)
Class II double insulated motor (no earth wire)
Nominal Supply Voltage = 220/240V
Current consumption at nominal torque = 100 watts (maximum)
Running Current = 0.5 amps (maximum)
Cable length = 2.5m
Cable size = 3 x 0.75
Important!
LS40 motors must never be wired in parallel.
Damage caused by parallel wiring will not be covered under warranty.
LT50 Motor
Suitable for roller blinds and awnings
Power Cable
Blue = Neutral
Brown = Active (direction 1)
Black = Active (direction 2)
Green/Yellow = Earth
Nominal Supply Voltage = 220/240V
Current consumption at nominal torque = 270 watts (maximum)
Running Current = 1.2 amps (maximum)
Cable length = 2.5m
Cable size = 4 x 0.75
Important!
LT50 motors must never be wired in parallel.
Damage caused by parallel wiring will not be covered under warranty.
To Next Page
Loading...
