Motorisation of Window Coverings
using Somfy Motors
Integration to BMS using LS40 or LT50
Option 1
CD4 individual motor controller
• Requires 240V power supply and has 240V latched output
•
Provides interlocking between up and down commands
• Dry contact impulse switching (impulse contact closure of 1 second minimum)
•
Contact between common and up or common and down to activate motor
• Simultaneous contact between a common up and down to create a stop
• CD4 Venetian module available for control of Venetian blinds
• Dimensions: 112 (h) x 52 (w) x 106 (d)
Note: Earth wire not required for LS40 motors
To Next Page
Loading...
