SOMFY J4 io - 8.4. Modifying Angular Travel

75
© 2013 Somfy SAS. All rights reserved. 06/2013
EN
8.4. Modifying the angular travel
For optimum operation of the J4 io actuator, it is
HVVHQWLDOWRDGMXVWWKHDQJXODUWUDYHO
The angular travel is the total angle necessary for the
blind to change from a slats closed position to a slats
fully open position.
The slats fully open position is reached when the slats no
longer tilt and the blind makes an initial raising movement.
 Press the down button until the lowered position is reached.
 When the blind is in the lowered position, press the Up and
Down buttons for 5 seconds: the blindPRYHVEULHÀ\
 Press the "my" button on the control point: the blind moves
EULHÀ\
 Move the slats from the slats closed position to the slats fully
RSHQSRVLWLRQE\EULHÀ\SUHVVLQJWKHUp button on the control
point.
 Press the Up and "my" buttons on the control point at the
same time, until the blind moves.
or
or