SOMFY J4 io - 67 MM Head Rail, Open below

66
© 2013 Somfy SAS. All rights reserved. 06/2013
EN
1
2
1
2
8
5
8
5
5
7
7
7
7
4
Installation with J406/J410 motors
(torque of 6 or 10 Nm)
 Screw the 2 adaptors (1) using 2 M3 x 8 bolts (2) on the
motor shaft.
Tightening torque = 1,35 N.m +/- 20%
Ensure that the J4 io plate cable does not pass over
a rotating part of the motor or mechanism.
 Fit the two head rail adaptors (8) on the motor.
 Insert the motor into the head rail (4).
 Using the clip (5), attach the motor in the head rail (4).
 The shaft can be fitted into the adapter using a headless
screw (7).
Tightening torque = 2 N.m maximum
4.4 78 x 67 mm head rail, open below