SOMFY J4 io - 66 MM Head Rail, Open below; J4 Io Plate

68
© 2013 Somfy SAS. All rights reserved. 06/2013
EN
 Screw the 2 adaptors (1) using 2 M3 x 8 bolts (2) on the
motor shaft.
Tightening torque = 1,35 N.m +/- 20%
Ensure that the J4 io plate cable does not pass over
a rotating part of the motor or mechanism.
 Fit the two head rail adaptors (8) on the motor.
 Insert the motor into the head rail (4).
 Using the clips (5), attach the motor in the head rail (4).

4.5 67 x 66 mm head rail, open below
1
2
1
2
8
5
5
8
7
7
7
7
4
4.6 J4 io Plate
The J4 io plate is supplied connected to the motor; it must be integrated into or on the outside of the
KHDGUDLO,I6RPI\VHQVRULVEHLQJXVHGWKHSODWHPXVWEH¿[HGWRWKHRXWVLGHRIWKHKHDGUDLO
191 mm
25 mm
MAX
19 mm
MAX