Soliris io
EN
15Copyright
©
2019-2020 SOMFY ACTIVITES SA, Société Anonyme. All rights reserved.
TRANSLATED VERSION
These instructions apply to all versions of Soliris io, the dierent models of which are available in the
current catalogue.
CONTENTS
GENERAL INFORMATION
Safety instructions
Danger
Indicates a danger which may result in immediate death or serious injury.
Warning
Indicates a danger which may result in death or serious injury.
Precaution
Indicates a danger which may result in minor or moderate injury.
Attention
Indicates a danger which may result in damage to or destruction of the product.
1. INTRODUCTION
1.1. FIELD OF APPLICATION
The Solirisio sensor is a wind and sun sensor equipped with io-homecontrol® radio technology.
Connected directly to io-homecontrol® motors for terrace awnings, vertical blinds, pergolas, external
venetian blinds or swinging shutters, Solirisio allows these applications to be controlled automatically if the
wind blows stronger than a pre-set threshold and according to the lighting intensity (Sun).
Wind and sun sensitivity thresholds are pre-set by default, but they can be adjusted on the sensor, according
to requirements and actual climatic conditions.
1. Introduction 15
1.1. Field of application 15
1.2. Liability 16
1.3. Specific safety advice 16
1.4. Contents 16
1.5. Tools required 16
1.6. Solirisio in detail 17
2. Installation 17
2.1. Installation recommendations 17
2.2. Mounting the sensor bracket 17
2.3. Wiring 17
2.4. Fitting the protective housing 20
2.5. Commissioning 20
2.6. Tips and advice on installation 23
3. Use and maintenance 25
3.1. Wind, Sun and Rain functions 25
3.2. Behaviour of the motorised product
according to climatic conditions 26
3.3. Questions about the product ? 27
4. Technical data 28
To Next Page
Loading...
