EasyManua.ls Logo

SOMFY Soliris io - Installation Situations

SOMFY Soliris io
17 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Soliris io
EN
25Copyright
©
2019-2020 SOMFY ACTIVITES SA, Société Anonyme. All rights reserved.
3. USE AND MAINTENANCE
This product is maintenance-free and no maintenance operations should be performed on it.
3.1. WIND, SUN AND RAIN FUNCTIONS
Wind function
LED Behaviour of the motorised product
1
Wind threshold exceeded: the Wind
LED is permanently lit green.
Moves to the safety position automatically and remains
blocked as long as the threshold is exceeded.
2
Wind level below the threshold: the
Wind LED goes o.
It is then possible to control the motorised product in
manual mode after 30s.
All the automatic functions remain locked for another
11min 30s.
Sun fonction
LED Behaviour of the motorised product
3
Sun sensitivity threshold exceeded:
the Sun LED is permanently lit green.
Moves to the sun protection position after 5min.
It is then possible to control the motorised product in
manual mode.
4
Sunshine level below the threshold:
the Sun LED goes o.
Moves to the safety position automatically after a
waiting time of 20 to 35min* (except for a roller shutter
at its lower end limit: it remains in this position).
It is then possible to control the motorised product in
manual mode.
*This delay prevents the motorised product from making unnecessary movements every time a cloud crosses
the sun, for example.
Rain function in safety mode
Behaviour of the motorised product
5
Moves to the safety position automatically and remains blocked as long as the sensor detects
rain.
6
It is then possible to control the motorised product in manual mode after 30s.
All the automatic functions remain locked for another 11min 30s.
Rain function in comfort mode
Behaviour of the motorised product
7
Moves to the lower end limit (or my) position automatically and remains blocked as long as the
sensor detects rain.
If the sensor is paired with a Somfy io bi-directional control point (e.g. TaHoma ), the scenario
programmed by the user is activated.
8
It is then possible to control the motorised product in manual mode and the wind/sun/rain
automatic functions are reactivated.

Other manuals for SOMFY Soliris io

Related product manuals