• System Settings
The Setup page provides pilot controls for click volume, time format, and local
time offset. Controls are provided to set the nearest airport criteria so that
airports not usable by the aircraft type do not appear in waypoint searches. A
control is provided that allows the pilot to select which weather receiver is used
for the weather shortcut accessed by turning the outer dual concentric knob.
Crew profiles are managed from this page. Settings on this page are crossfilled
to all other GDUs in the system.
Units of Measure for temperature, barometric pressure, nav angle, altitude, fuel,
distance, and wind speed are pilot controllable via the System -> Units page.
These units are propagated throughout the system with the exception of Air
Temperature Reference and Fuel Computer units which only affect the display
being used to make the selection.
The units and markings on the PFD are not user configurable. They match the
units as specified in the aircraft’s Airplane Flight Manual and standby
instruments.
• System Data Logging
The Txi system incorporates a data logging feature that can record parameters
related to the aircraft’s primary flight instruments, engine indications, and
aircraft configuration. Recorded data is stored in internal memory and can be
exported to an SD Card by the pilot. Data logs can be sent via the optional Flight
Stream 510 to a PED in the cockpit.
To Next Page
