Sonic EXPRESSlink 3 - Page 12

10
Problem Possible cause Solution
The programming
cables are not
compatible with the
hearing products you
are trying to fit, or
detection of a
connected product is
not successful
Youmightbeusing
an outdated version
of EXPRESSlink.
EXPRESSlink
3
has
two (2) programming
sockets and uses
two (left and right)
programming cables.
Previous versions of
EXPRESSlink
had
only one program-
ming connector and
usedaY-cable.This
version of EXPRESS-
link is not compatible
with all products
Please contact your
local sales rep to get
your EXPRESSlink
replaced
The indicator light
remains turned off
The unit might be
faulty
Please contact your
local sales rep or
support