EXPRESSlink
3
Programming
Interface
User Manual
USB Cable
1 SAFETY INFORMATION
These instructions for use cover the product with the following model
name: EXPRESSlink
3
Throughout this manual the following signs will be used to indicate valu-
able or important information:
This sign indicates important safety information that must be
observed to minimize risks or to avoid hazardous situations
2 INTRODUCTION
EXPRESSlink
3
is a proprietary hearing instrument programming inter-
face for programming hearing instruments from Sonic, Bernafon and
Oticon.
EXPRESSlink
3
connects to the computer via the enclosed USB cable. It
is powered from the computer’s USB port and does not need an external
power supply. EXPRESSlink
3
offers 2 connection ports (left and right) for
NOAHlink standard programming cables.
EXPRESSlink
3
is easy to install, supports plug and play, (e.g. no serial
port set-up problems) and offers faster programming speed than the
existing NOAHlink™ and HI-PRO USB™.
3 CONTENTS OF THE EXPRESSlink
3
PACKAGING
To Next Page
Loading...
