Page 62 Configuring PortShield Interfaces
Configuring PortShield Interfaces
The SonicWALL PortShield feature enables you to configure
some or all of the switch ports on the SonicWALL NSA 240
appliance into separate contexts, or PortShield interfaces,
providing protection from traffic on the LAN, WAN, and DMZ, as
well as the devices inside your network. Each context has its
own wire-speed switch ports that have protection of a
dedicated, deep-packet inspection firewall.
To Configure Switch Ports Using SonicWALL PortShield:
1. On the Network > Interfaces page, click the PortShield
Wizard button. This will run the SonicWALL PortShield
Setup Wizard. Read the Introduction and click Next.
2. Select the appropriate groupings of SwitchPort interfaces
for the SonicWALL NSA 240 appliance. Click Next to
continue.This will prompt a configuration summary to
appear. Verify the ports assigned are correct.
3. Click Apply to change port assignments.
For more information about SwitchPort interfaces, see the
SonicOS Enhanced Administrator’s Guide.
To Next Page
Loading...
