Sonoro iElements - Connecting the antenna

12
4.4 Connecting the antenna
ThesonoroiElementshasanintegratedantennaforreceivingradiosignalsintheFM
frequency range. If the reception at the installation site of the device is not satisfactory or if
youwishtoreceivemoreFMorAMstations,connectthesuppliedFMorAMantennaora
suitablehouseantenna.
FMantennaorhouseantenna
1. InsertthesuppliedFMantennaoryourhouseantennaintotheFMantennaconnection
onthebackofthedevice.
2. ChangethepositionoftheFMswitchfromINT to EXT.
3. AdjustthesuppliedFMantennasothatoptimumreceptionisensured.
NOTE!
IfnoexternalantennaisconnectedtotheFMsocket,theswitchshouldbeset
to INTtoguaranteethebestpossiblereceptionwiththeinternalantenna.
AM antenna
1. InsertthesuppliedAMantennaintotheAMantennasocketonthebackofthedevice.
2. AdjustthesuppliedAMantennasothatoptimumreceptionisensured.