Sonoro iElements - Troubleshooting Common Issues

English
25
Fault Possiblecause Remedy
Poor AM recep-
tion quality
AM antenna is not con-
nected
Connect the AM antenna (refer to section
4.4"Connectingtheantenna").
The AM antenna is not cor-
rectly positioned
Change the position of the
AM antenna.
Alarm does not
work
Alarm is not switched on Switch the alarm on (refer to section
8.2"Alarm").
Alarm volume is set to
minimum
Increase the volume (refer to section
8.2"Alarm").
Headphones are connected Remove the headphones from the
socket.
11. Technical data
Display 8digitVFDdisplay
Internalbatterysupply 3Vlithiumbattery(IECcode:CR2032)
Power consumption during
stand-byoperation
approx. 2 W
Dimensions approx. 210 x 130 x 120 mm
Weight without mains
adapter
approx. 1,600 g
AUX-IN
Max. input voltage 250 mV eff.
Input impedance 22 kOhm
MAINS ADAPTER
Modelnumber VA24*-120200
Input 100-240V~AC,0.7A,50-60Hz
Output 12 V DC, 2.0 A
Dimensions approx. 81.5 x 49.5 x 48,5 mm
Weight approx. 200 g
*fordifferentnationalversions(e.g.AforUSA,BforEurope,CforUK,EforAustralia).
Subjecttotechnicalmodications!