Sonos Digital Music System User GuideC-2
Setup Using the Sonos Controller
1. From the Welcome screen, touch OK to begin the setup process.
2. Follow the Controller’s on-screen prompts to connect and then name your
ZonePlayer.
Successful connection
(If your ZonePlayer does not
connect, go to our Web site at
http://faq.sonos.com/dcrsf for
assistance)
Press and release the Mute and Volume
Up buttons simultaneously on this
ZonePlayer. You may release the buttons
as soon as the Mute indicator (green) and
the ZonePlayer Status indicator (white)
start to blink alternately.
ZonePlayer
status
indicator
Mute button
Volume up (+)
Once the ZonePlayer is successfully connected, the
ZonePlayer Status indicator will stop flashing and
change to solid white (normal operation), and the
Mute indicator will go off.
To Next Page
Loading...
