Sonos Digital Music System User Guide3-2
Starting the Sonos Setup Wizard
1. Start the Sonos Desktop Controller software.
2. When instructed, press and release the Mute and Volume Up buttons
simultaneously on the ZonePlayer you are connecting. (Remember, the first
ZonePlayer you install must connect to your home network using a standard
Ethernet cable).
You may release the buttons as soon as the Mute indicator (green) and the
ZonePlayer Status indicator (white) start to blink alternately. This takes
approximately one second.
ZonePlayer
status
indicator
Mute button
Volume up (+)
Once the ZonePlayer is successfully connected, the
ZonePlayer Status indicator will stop flashing and
change to solid white (normal operation), and the
Mute indicator will go off.
ZonePlayer added successfully ZonePlayer not added
Go to our Web site at
http://faq.sonos.com/dcrsf for assistance
To Next Page
Loading...
