107
Using your computer
Copying images to your computer
This section describes the process using a
Windows computer as an example.
You can copy images from the camera to
your computer as follows.
For directly inserting the recording
medium in a computer
Remove the recording medium from the
camera and insert it in the computer and
copy the images.
For connecting the camera with the
recording medium inserted to a
computer using the USB connection
Follow Stages 1 through 4 on pages 107 to
111 to copy images.
1 Insert a recording medium with
recorded images into the camera.
2 Insert the sufficiently charged
battery pack in the camera, or
connect the camera to a wall
outlet (wall socket) with the AC
Adaptor/charger (not supplied).
• When you copy images to your computer
using insufficient battery pack, copying may
fail or image data may become corrupted if
the battery pack shut down too soon.
3 Turn on the camera and the
computer.
Stage 1: Preparing the camera
and the computer
To Next Page
Loading...
