91
For details on the operation
1
page 80
Playback menu
Playback menu 2
The default settings are marked with .
Plays back recorded images in order with a 5-second interval (Slide show).
Select [Enter] in [Slide show].
The slide show starts.
To end the slide show, press V on the controller or MENU.
• During a slide show, you can display the previous/next image with b/B.
• You can pause/play back the slide show with the center of the controller.
• You can switch the recording data on/off with the (Display) button.
Using the camera, you can specify the images and the number of images to print before you
print images at a shop or with your printer.
• You cannot mark RAW data files.
• To print an image recorded in Adobe RGB with faithful color, the printer needs to be DCF2.0 option color
space compliant.
• You can specify any number up to 9.
To mark selected images
1 Select [MarkedImages] in [ DPOF set].
2 Select the image you want to mark with b/B on the controller, then select the number of sheets
with v/V (increases with v and decreases with V).
A (DPOF set) mark appears on the selected image, and the number of sheets is selected.
• To cancel a selection, press V repeatedly to remove the (DPOF set) mark.
3 To mark other images, repeat step 2.
4 Press the center of the controller.
A (DPOF set) mark appears on the selected image, and the screen returns to the menu screen.
Slide show
DPOF set
MarkedImages
Prints only the selected images.
Follow the procedure below.
All on card
Prints all the images in the recording medium.
Follow the procedure below.
To Next Page
Loading...
Need help?
General
