Name: Sony a (alpha) DSLR-A100
Brand: Sony
Rating: 5 (1 reviews)

To Next Page

To Previous Page

For details on the operation

page 80

Setup menu 1

Setup menu

The default settings are marked with .

You can adjust the brightness of the LCD monitor.

1 Select [Enter] in [LCDbrightness].

2 Adjust the brightness with b/B on the controller or with the control dial, then press the center of

the controller.

Selects the USB mode to be used when connecting the camera to a computer, etc., using a

USB cable.

Sets the video signal output according to the TV color system of the connected video

equipment. Different countries and regions use different TV color systems. If you want to

view images on a TV screen, check page 79 for the TV color system of the country or region

where the camera is used.

LCDbrightness

Transfer mode

Mass Storage

Used for copying images to the computer. The camera is

recognized as a USB mass storage device.

PTP

Prints the images with a PictBridge compliant printer or

copies images to PTP (Picture Transfer Protocol) compliant

devices.

• For details on printing with a PictBridge compliant printer, see

page 123.

Video output

NTSC

Sets the video output signal to NTSC mode (e.g., for the USA,

Japan).

PAL

Sets the video output signal to PAL mode (e.g., for Europe).

Questions and Answers:

Need help?

Do you have a question about the Sony a (alpha) DSLR-A100 and is the answer not in the manual?

Sony a (alpha) DSLR-A100 Specifications

General